Personalize your stuff with these cute Theta Gamma Tau decals. Can be used on various hard surfaces, including, glass, ceramic, plastic, wood, leather etc.
All decals are approximately 6-7in wide.
How to apply decals:
1. Prepare the Surface:
Clean Thoroughly:Ensure the surface is free of dust, dirt, and any residue, including oils from your hands.
Dry Completely:Make sure the surface is completely dry before applying the sticker.
Avoid Alcohol: Decals are not alcohol-friendly, so use soap and water or a 50/50 mix of rubbing alcohol and water for cleaning.
2. Prepare the Sticker:
Remove Excess Material:Trim down the wrap to remove any excess material to your preference.
Peel the Backing:Gently peel away the backing paper, exposing the adhesive side of the sticker.
Position Carefully:Align the sticker precisely on the surface where you want it.
3. Apply the Sticker:
Squeegee:Use a squeegee tool or your fingers to firmly press the sticker onto the surface, working from the center outwards to remove any air bubbles.
Apply Pressure:Ensure the sticker is firmly adhered to the surface by applying pressure.
Peel Slowly:Once the sticker is in place, carefully peel off the clear transfer film.
4. Final Touches:
Rub, Rub, Rub:Make sure to rub the decal thoroughly after application to ensure proper adhesion.
Check for Air Bubbles:If any air bubbles remain, gently try to work them out with a squeegee.
Decals are Permanent:UV-DTF stickers are designed to be permanent, so be sure of your placement before applying.
